Hai inizialmente provato a mettere la M brand inglese o la francese nobrand? In caso prova la Brand inglese nuovamente
<----- SE TI SONO STATO D'AIUTO RINGRAZIAMI CON UN THANKS *IO STO CON VALE*
LINK ALLA NOSTRA ROM: [ROM][OFFICIAL NOUGAT][7.0] Oxy Lite 4.0 odex by BluMak2000 TEAM
Al momento c'è solo Vodafone, ma vale la pena tentare. C'è anche italiano, non solo francese http://www.sammobile.com/firmwares/d...FVFG3DPB8_OMN/
<----- SE TI SONO STATO D'AIUTO RINGRAZIAMI CON UN THANKS *IO STO CON VALE*
LINK ALLA NOSTRA ROM: [ROM][OFFICIAL NOUGAT][7.0] Oxy Lite 4.0 odex by BluMak2000 TEAM
il problema che proprio grazie a sta brand del cavolo mi si è fottuto il cell..ora riprovo con le varie pit
x la vodafone 6.0.1 quale pit dovrei usare?
allora con la brand vodafone a pit 100m mi da questo errore:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ultima modifica di Kraton96; 26-02-16 alle 07:50
allora flashato la vodafone 6.0.1 con il pit 250m
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
andato a segno, poi mi ha fatto l'aggiornamento driver con la schermata blu e adesso mi si riavvia sempre con la schermata samsung. provo a rifleshare senza pit
flashato di nuovo senza pit e andato a segno, ma mi rimane sempre sulla schermata di samsung...booooo
adesso me lo fa mandare in recovery mode. ma mi da il segno di anroid morto con il triangolino, e poi si apre. quindi pulisco cache e data ma nnt
adesso mi lamppeggia sulla schermata samsung..
continua a rimanere sulla schermata samsung...cosa devo fare? provo con un altro pit?
ovviamente con gli altri pit non funziona. ora cmq sappiamo che col 250m va xo rimane bloccato sulla schermata samgung...uffa
xo considerando che nn sapevamo dove mettere i piedi direi che ci stiamo avvicinando xD
quando sta nella schermata blu di aggiornamento, si blocca a 32% poi fa "erasing" e parte l'ottimizzazione dei programmi in nn so quale lingua xD tipo russo xD
beh..il cell si è acceso, sto facendo il ripristino delle app...oh gesù cristo...siete il miglior forum x android...GRAZIE!!!
Ultima modifica di Kraton96; 26-02-16 alle 08:45
Ottimo contento tu abbia risolto. Probabilmente mancava solo il wipe data /factory reset dalla recovery stock. Adesso per un pò ti consiglio di non cambiare firmware 😉 tieni presente che se cercherai di mettere in futuro un firmware nobrand quasi sicuramente avrai gli stessi problemi.
Per i grazie basta lasciare un thank nei post come da buona norma del forum
<----- SE TI SONO STATO D'AIUTO RINGRAZIAMI CON UN THANKS *IO STO CON VALE*
LINK ALLA NOSTRA ROM: [ROM][OFFICIAL NOUGAT][7.0] Oxy Lite 4.0 odex by BluMak2000 TEAM
Kraton96 (22-03-16)
Per chi ha problemi con la HIDDEN usi il firmware francese. Così non si avranno problemi nel flash è di soli 7Mb.
stesso problema anche a me ... non so come fare... odin riconosce il mio s6 edge e anche smart switch soltanto che dice che non è supportato
<----- SE TI SONO STATO D'AIUTO RINGRAZIAMI CON UN THANKS *IO STO CON VALE*
LINK ALLA NOSTRA ROM: [ROM][OFFICIAL NOUGAT][7.0] Oxy Lite 4.0 odex by BluMak2000 TEAM
Leggi il regolamento del Forum
Sto Guidando (cit. Dieguccio)“È quando le aspettative sono ridotte a zero che si apprezza veramente ciò che si ha.”(cit. S.H.)
bluflight13 (18-09-16)