Guida di unbrick z7 max-mini

[manuelb]

Yunos phone no oneplus!!!!! I can't read the photo...photo is reduced....baaahhhh...senza parole...however how you brick it ?

Inviato dal mio z7 max 48000 antutu usando Androidiani App

[Jan1959]

I wanted to resize mine partition.
With the software on nubia forum is wanted to change it in 16+16.
It came back with 32+0.
I trey it again is there was the brick.

The photo: when i go to Open Disk management Console (right side on the bottum above Continue)

Secund screen

Drives must be initialized before you can through management for logical access. Drive one.
The following partition style to use for the selected disks: MBR or GPT


I look it up what that mean:
Before an empty disk can be used will have to be initialized first. Initialization takes place on the first sector of a hard drive and set the operating system unable to boot and also contains the partition table. By partitioning is indicated which part of the hard disk may be used.

It looks like I have to initialize en then probably format it?

Can I sent the picture directly to you on one way of another?

[manuelb]

I wanted to resize mine partition.
With the software on nubia forum is wanted to change it in 16+16.
It came back with 32+0.
I trey it again is there was the brick.

The photo: when i go to Open Disk management Console (right side on the bottum above Continue)

Secund screen

Drives must be initialized before you can through management for logical access. Drive one.
The following partition style to use for the selected disks: MBR or GPT


I look it up what that mean:
Before an empty disk can be used will have to be initialized first. Initialization takes place on the first sector of a hard drive and set the operating system unable to boot and also contains the partition table. By partitioning is indicated which part of the hard disk may be used.

It looks like I have to initialize en then probably format it?

Can I sent the picture directly to you on one way of another?

No no you mustn't format !! Upload photo on mega and give me link...

Inviato dal mio z7 max 48000 antutu usando Androidiani App

[cracky]

Hi, if pc now view phone no touch o reformat emmc. With nubia tools simple reprogramming rom, all partitions included in this rom.

[Jan1959]

initialize.PNG 173 KB
https://mega.co.nz/#!IBMFHRxB!4Lr9V_...BBVrA3YgiORh4g

[Jan1959]

I choose antoher dirver ZTE Composite ADB Interface
I was accepted but Id is stil 19
Is that good or......

New info

In miy computer i can not see it still.

I wil go for now and try tomorrow again.

[manuelb]

Cracky tu quando hai flashato il boot hai selezionato mbr vero ? No gpt

Inviato dal mio z7 max 48000 antutu usando Androidiani App

[Jan1959]

Cracky tu quando hai flashato il boot hai selezionato mbr vero ? No gpt

Inviato dal mio z7 max 48000 antutu usando Androidiani App

I dont understand thequestion.
Google says: Cracky you when you flashed boot mbr have selected it? No gpt


When I go to boot manager i get a question to initalize the Z7 drive.
At this moment i did NOT initalize in HDD raw the Z7 drive.


I write recovery.img once again succesfull and try several times to change the driver
No success stil id 19

[manuelb]

I dont understand thequestion.
Google says: Cracky you when you flashed boot mbr have selected it? No gpt


When I go to boot manager i get a question to initalize the Z7 drive.
At this moment i did NOT initalize in HDD raw the Z7 drive.


I write recovery.img once again succesfull and try several times to change the driver
No success stil id 19

this message is for cracky not for you..

[bbertr13]

Sorry I'm not italian but french so I submit my post in english.
I've read almost all the posts of this thread but not seen similar issue as I face.
My Z7 mini is bricked.
I installed the required driver 'Qualcomm QDLoader 9008' and my phone i detected as such when connected to my PC (windows 7 64 bits).
I start Nubia ToolStudio and click refresh.
My phone appears in the list associated with the correct com port.
But after 1 seconds the phone disappears from the device list of my computer then reappears a few seconds (3 or 4) later.
So when I click the 'Start' button in the nubia ToolStudio, I get an error.
Does anyone already faced the same issue ? Any suggestion ?
Thanks.