[SUPPORTO MODDING] Thread di Aiuti e Consigli alle Operazioni di modding

[pietro980]

Fortunatamente io non ho mai avuto a che fare col centro assistenza,quindi non ti saprei dire,cmq ripeto qualunque cavolata tu gli dica al 90% non credo ci siano problemi.

[Raf80]

Che poi tra l'altro il centro assistenza lo manda all'assistenza vera e propria, quindi dicono quello che vogliono loro. XD
Grazie mille allora, scusa per averti rubato del tempo...
Se qualcuno magari entro lunedì riesce a procurarmi un backup della cartella image mi farebbe un piacere enorme! ^_^

[pietro980]

Che poi tra l'altro il centro assistenza lo manda all'assistenza vera e propria, quindi dicono quello che vogliono loro. XD
Grazie mille allora, scusa per averti rubato del tempo...
Se qualcuno magari entro lunedì riesce ad aiutarmi ben venga! ^_^

Infatti la vodafone poi lo da all'assistenza vera e propria!cmq prego figurati.spero che tu risolva.

[Raf80]

Speriamo... :P

[kresh]

uppppppppppp

[searchworlds]

Le rom jellybean per il nostro u800pro non sono ancora state rese perfettamente stabili e funzionanti al 100% e hanno problemi come quello che hai descritto te.
Non è risolto al momento, o cambi rom o te la tieni così.

[Raf80]

Sto provando a ripristinare il telefono seguendo la guida su AndroidWorld, ma non riesco nel passaggio "se l'output del comando presenta voci in cui viene menzionato android, huawei, qualcomm o adb (e simili legati al mondo android) segnatevi il percorso della periferica (sdb o sdc o sdd e via di seguito) (se non trovate voci del genere il pc non riconosce il cell)" all'interno del terminale...
Qualcuno mi aiuti, ci sto perdendo ore e ore dietro a questo telefono...

Questo è il resoconto:

[ 0.568621] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.569962] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.575447] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.576173] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.576177] TCP: reno registered
[ 0.576205] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.576253] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.576423] NET: Registered protocol family 1
[ 0.576711] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 0.648225] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 0.648342] pci 0000:02:00.0: >Boot video device
[ 0.648346] PCI: CLS 32 bytes, default 64
[ 0.648745] audit: initializing netlink socket (disabled)
[ 0.648759] type=2000 audit(1355773105.644:1): initialized
[ 0.671015] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.672972] VFS: Disk quotas dquot_6.5.2
[ 0.673020] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.673559] fuse init (API version 7.19)
[ 0.673643] msgmni has been set to 5991
[ 0.673974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.674001] io scheduler noop registered
[ 0.674003] io scheduler deadline registered (default)
[ 0.674035] io scheduler cfq registered
[ 0.674197] pcieport 0000:00:0b.0: >irq 40 for MSI/MSI-X
[ 0.674275] pcieport 0000:00:0c.0: >irq 41 for MSI/MSI-X
[ 0.674349] pcieport 0000:00:0d.0: >irq 42 for MSI/MSI-X
[ 0.674415] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.674435] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.674491] intel_idle: does not run on family 6 model 15
[ 0.674582] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.674588] ACPI: Power Button [PWRB]
[ 0.674646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.674649] ACPI: Power Button [PWRF]
[ 0.674703] ACPI: Fan [FAN] (on)
[ 0.674780] ACPI: Requesting acpi_cpufreq
[ 1.648033] Refined TSC clocksource calibration: 2199.999 MHz.
[ 1.648043] Switching to clocksource tsc
[ 2.741779] Freeing initrd memory: 11072k freed
[ 2.754702] thermal LNXTHERM:00: >registered as thermal_zone0
[ 2.754706] ACPI: Thermal Zone [THRM] (47 C)
[ 2.754749] GHES: HEST is not enabled!
[ 2.754857] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.775234] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.796554] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.796795] Linux agpgart interface v0.103
[ 2.798177] brd: module loaded
[ 2.798890] loop: module loaded
[ 2.799023] ahci 0000:00:0e.0: >version 3.0
[ 2.799186] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 2.799226] ahci 0000:00:0e.0: >controller can do NCQ, turning on CAP_NCQ
[ 2.799228] ahci 0000:00:0e.0: >controller can't do PMP, turning off CAP_PMP
[ 2.799286] ahci 0000:00:0e.0: >AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 2.799289] ahci 0000:00:0e.0: >flags: 64bit ncq sntf led clo pio
[ 2.799293] ahci 0000:00:0e.0: >setting latency timer to 64
[ 2.800045] scsi0 : ahci
[ 2.800143] scsi1 : ahci
[ 2.800213] scsi2 : ahci
[ 2.800284] scsi3 : ahci
[ 2.800395] ata1: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8100 irq 21
[ 2.800398] ata2: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8180 irq 21
[ 2.800400] ata3: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8200 irq 21
[ 2.800402] ata4: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8280 irq 21
[ 2.800592] pata_acpi 0000:00:08.0: >setting latency timer to 64
[ 2.800875] Fixed MDIO Bus: probed
[ 2.800919] tun: Universal TUN/TAP device driver, 1.6
[ 2.800921] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.801005] PPP generic driver version 2.4.2
[ 2.801058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.801107] ehci_hcd 0000:00:04.1: >setting latency timer to 64
[ 2.801111] ehci_hcd 0000:00:04.1: >EHCI Host Controller
[ 2.801118] ehci_hcd 0000:00:04.1: >new USB bus registered, assigned bus number 1
[ 2.801144] ehci_hcd 0000:00:04.1: >debug port 1
[ 2.801153] ehci_hcd 0000:00:04.1: >cache line size of 32 is not supported
[ 2.801176] ehci_hcd 0000:00:04.1: >irq 22, io mem 0xefffe000
[ 2.812010] ehci_hcd 0000:00:04.1: >USB 2.0 started, EHCI 1.00
[ 2.812052] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[ 2.812054] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.812057] usb usb1: >Product: EHCI Host Controller
[ 2.812059] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 2.812061] usb usb1: >SerialNumber: 0000:00:04.1
[ 2.812167] hub 1-0:1.0: >USB hub found
[ 2.812173] hub 1-0:1.0: >10 ports detected
[ 2.812255] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.812295] ohci_hcd 0000:00:04.0: >setting latency timer to 64
[ 2.812298] ohci_hcd 0000:00:04.0: >OHCI Host Controller
[ 2.812304] ohci_hcd 0000:00:04.0: >new USB bus registered, assigned bus number 2
[ 2.812327] ohci_hcd 0000:00:04.0: >irq 23, io mem 0xeffff000
[ 2.870013] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[ 2.870017] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.870019] usb usb2: >Product: OHCI Host Controller
[ 2.870022] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[ 2.870024] usb usb2: >SerialNumber: 0000:00:04.0
[ 2.870123] hub 2-0:1.0: >USB hub found
[ 2.870129] hub 2-0:1.0: >10 ports detected
[ 2.870204] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.870260] usbcore: registered new interface driver libusual
[ 2.870299] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.872961] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.872967] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.873088] mousedev: PS/2 mouse device common for all mice
[ 2.873214] rtc_cmos 00:05: >RTC can wake from S4
[ 2.873369] rtc_cmos 00:05: >rtc core: registered rtc_cmos as rtc0
[ 2.873407] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.873488] device-mapper: uevent: version 1.0.3
[ 2.873549] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.873557] cpuidle: using governor ladder
[ 2.873558] cpuidle: using governor menu
[ 2.873560] EFI Variables Facility v0.08 2004-May-17
[ 2.873768] ashmem: initialized
[ 2.873891] TCP: cubic registered
[ 2.874004] NET: Registered protocol family 10
[ 2.874217] NET: Registered protocol family 17
[ 2.874231] Key type dns_resolver registered
[ 2.874362] PM: Hibernation image not present or could not be loaded.
[ 2.874376] registered taskstats version 1
[ 2.876869] Key type trusted registered
[ 2.879015] Key type encrypted registered
[ 2.881485] Magic number: 8:910:647
[ 2.881501] scsi_host host1: >hash matches
[ 2.881504] scsi host1: >hash matches
[ 2.881582] processor LNXCPU:00: >hash matches
[ 2.881634] rtc_cmos 00:05: >setting system clock to 2012-12-17 19:38:28 UTC (1355773108)
[ 2.882181] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.882185] EDD information not available.
[ 3.120012] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.120027] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.120038] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.120052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.120604] ata4.00: ATA-7: MAXTOR STM3250310AS, 4.AAA, max UDMA/133
[ 3.120606] ata4.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.121285] ata4.00: configured for UDMA/133
[ 3.122747] ata2.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
[ 3.126712] ata2.00: configured for UDMA/100
[ 3.180011] usb 1-2: >new high-speed USB device number 3 using ehci_hcd
[ 3.243441] scsi 1:0:0:0: >CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
[ 3.313069] usb 1-2: >New USB device found, idVendor=03f0, idProduct=2e12
[ 3.313072] usb 1-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.313075] usb 1-2: >Product: Officejet 4500 G510n-z
[ 3.313077] usb 1-2: >Manufacturer: HP
[ 3.313079] usb 1-2: >SerialNumber: CN13FH51G205HR
[ 3.353834] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.353837] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.353936] sr 1:0:0:0: >Attached scsi CD-ROM sr0
[ 3.354001] sr 1:0:0:0: >Attached scsi generic sg0 type 5
[ 3.354133] scsi 3:0:0:0: >Direct-Access ATA MAXTOR STM325031 4.AA PQ: 0 ANSI: 5
[ 3.354238] sd 3:0:0:0: >[sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.354265] sd 3:0:0:0: >Attached scsi generic sg1 type 0
[ 3.354282] sd 3:0:0:0: >[sda] Write Protect is off
[ 3.354286] sd 3:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 3.354306] sd 3:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.407937] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 3.408309] sd 3:0:0:0: >[sda] Attached SCSI disk
[ 3.409594] Freeing unused kernel memory: 928k freed
[ 3.409983] Write protecting the kernel read-only data: 12288k
[ 3.414623] Freeing unused kernel memory: 1472k freed
[ 3.419061] Freeing unused kernel memory: 1124k freed
[ 3.424047] usb 1-10: >new high-speed USB device number 4 using ehci_hcd
[ 3.440284] udevd[97]: starting version 175
[ 3.585632] pata_amd 0000:00:08.0: >version 0.4.1
[ 3.585694] pata_amd 0000:00:08.0: >setting latency timer to 64
[ 3.587248] Floppy drive(s): fd0 is 1.44M

[Raf80]

[ 3.590696] scsi4 : pata_amd
[ 3.594119] scsi5 : pata_amd
[ 3.594589] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 3.594593] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 3.601448] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 3.601678] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[ 3.601712] forcedeth 0000:00:0f.0: >setting latency timer to 64
[ 3.604090] usb 1-10: >New USB device found, idVendor=0424, idProduct=2228
[ 3.604091] FDC 0 is a post-1991 82077
[ 3.604097] usb 1-10: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.604099] usb 1-10: >Product: Flash Card Reader
[ 3.604102] usb 1-10: >Manufacturer: Generic
[ 3.604104] usb 1-10: >SerialNumber: 000022272228
[ 3.608885] Initializing USB Mass Storage driver...
[ 3.609035] scsi6 : usb-storage 1-10:1.0
[ 3.609143] usbcore: registered new interface driver usb-storage
[ 3.609145] USB Mass Storage support registered.
[ 3.764479] ata5.01: ATA-7: Hitachi HDT725032VLAT80, V54OA4NA, max UDMA/133
[ 3.764483] ata5.01: 625142448 sectors, multi 1: LBA48
[ 3.764491] ata5: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc70000) ACPI=0x7f01f (600:15:0x1c)
[ 3.780390] ata5.01: configured for UDMA/133
[ 3.780498] scsi 4:0:1:0: >Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 3.780713] sd 4:0:1:0: >[sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.780715] sd 4:0:1:0: >Attached scsi generic sg2 type 0
[ 3.780811] ata6: port disabled--ignoring
[ 3.780829] sd 4:0:1:0: >[sdb] Write Protect is off
[ 3.780832] sd 4:0:1:0: >[sdb] Mode Sense: 00 3a 00 00
[ 3.780861] sd 4:0:1:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.789797] sdb: sdb1
[ 3.790058] sd 4:0:1:0: >[sdb] Attached SCSI disk
[ 4.036026] usb 2-1: >new low-speed USB device number 2 using ohci_hcd
[ 4.124830] forcedeth 0000:00:0f.0: >ifname eth0, PHY OUI 0x732 @ 1, addr 00:23:54:09:10:46
[ 4.124836] forcedeth 0000:00:0f.0: >highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 4.252083] usb 2-1: >New USB device found, idVendor=045e, idProduct=00f9
[ 4.252090] usb 2-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.252093] usb 2-1: >Product: Microsoft Wireless Desktop Receiver 3.1
[ 4.252096] usb 2-1: >Manufacturer: Microsft
[ 4.283099] usbcore: registered new interface driver usbhid
[ 4.283104] usbhid: USB HID core driver
[ 4.285695] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input2
[ 4.285803] microsoft 0003:045E:00F9.0001: >input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:04.0-1/input0
[ 4.285818] microsoft 0003:045E:00F9.0002: >fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[ 4.301205] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input3
[ 4.301352] microsoft 0003:045E:00F9.0002: >input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:04.0-1/input1
[ 4.386714] kjournald starting. Commit interval 5 seconds
[ 4.386796] EXT3-fs (loop0): mounted filesystem with ordered data mode
[ 4.617718] scsi 6:0:0:0: >Direct-Access Generic Flash HS-CF 3.95 PQ: 0 ANSI: 0
[ 4.621707] scsi 6:0:0:1: >Direct-Access Generic Flash HS-MS 3.95 PQ: 0 ANSI: 0
[ 4.625334] scsi 6:0:0:2: >Direct-Access Generic Flash HS-SM 3.95 PQ: 0 ANSI: 0
[ 4.628706] scsi 6:0:0:3: >Direct-Access Generic Flash HS-SD/MMC 3.95 PQ: 0 ANSI: 0
[ 4.629411] sd 6:0:0:0: >Attached scsi generic sg3 type 0
[ 4.630953] sd 6:0:0:1: >Attached scsi generic sg4 type 0
[ 4.631177] sd 6:0:0:2: >Attached scsi generic sg5 type 0
[ 4.631337] sd 6:0:0:3: >Attached scsi generic sg6 type 0
[ 4.804462] sd 6:0:0:0: >[sdc] Attached SCSI removable disk
[ 4.809207] sd 6:0:0:1: >[sdd] Attached SCSI removable disk
[ 4.813575] sd 6:0:0:2: >[sde] Attached SCSI removable disk
[ 4.817949] sd 6:0:0:3: >[sdf] Attached SCSI removable disk
[ 5.210452] EXT3-fs (loop0): using internal journal
[ 55.285184] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 55.289225] JFS: nTxBlock = 8192, nTxLock = 65536
[ 55.324547] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 55.364580] QNX4 filesystem 0.2.3 registered.
[ 55.409517] Btrfs loaded

[Raf80]

[ 60.507383] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k
[ 61.795952] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 61.848554] udevd[6879]: starting version 175
[ 62.613120] EXT3-fs (loop0): using internal journal
[ 62.617585] i2c i2c-0: >nForce2 SMBus adapter at 0x1c00
[ 62.619029] i2c i2c-1: >nForce2 SMBus adapter at 0x1c80
[ 62.700633] wmi: Mapper loaded
[ 62.782114] parport_pc 00:0a: >reported by Plug and Play ACPI
[ 62.782232] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 62.921203] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 62.921249] parport1: PC-style at 0xcd00, irq 17 [PCSPP,TRISTATE,EPP]
[ 63.037579] 0000:01:06.0: ttyS4 at I/O 0xcf00 (irq = 17) is a 16550A
[ 63.058227] 0000:01:06.0: ttyS5 at I/O 0xce00 (irq = 17) is a 16550A
[ 63.153805] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
[ 63.156078] ppdev: user-space parallel port driver
[ 63.556715] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
[ 63.559811] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 63.592195] coretemp coretemp.0: >Using relative temperature scale!
[ 63.592212] coretemp coretemp.0: >Using relative temperature scale!
[ 63.981661] [drm] Initialized drm 1.1.0 20060810
[ 64.772352] init: failsafe main process (7192) killed by TERM signal
[ 64.832176] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 64.832807] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x096080c1)
[ 64.835814] [drm] nouveau 0000:02:00.0: Checking PRAMIN for VBIOS
[ 64.879680] snd_hda_intel 0000:00:09.0: >power state changed by ACPI to D0
[ 64.879688] snd_hda_intel 0000:00:09.0: >power state changed by ACPI to D0
[ 64.879839] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 64.879843] hda_intel: Disabling MSI
[ 64.879873] snd_hda_intel 0000:00:09.0: >setting latency timer to 64
[ 64.894136] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 64.894141] [drm] nouveau 0000:02:00.0: Using VBIOS from PRAMIN
[ 64.894144] [drm] nouveau 0000:02:00.0: BIT BIOS found
[ 64.894147] [drm] nouveau 0000:02:00.0: Bios version 62.94.4b.00
[ 64.894151] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[ 64.895568] [drm] nouveau 0000:02:00.0: MXM: no VBIOS data, nothing to do
[ 64.895573] [drm] nouveau 0000:02:00.0: DCB version 4.0
[ 64.895576] [drm] nouveau 0000:02:00.0: DCB outp 00: 02000300 00000028
[ 64.895578] [drm] nouveau 0000:02:00.0: DCB outp 01: 01000302 00020030
[ 64.895580] [drm] nouveau 0000:02:00.0: DCB outp 02: 04011310 00000028
[ 64.895582] [drm] nouveau 0000:02:00.0: DCB outp 03: 02011312 00020030
[ 64.895584] [drm] nouveau 0000:02:00.0: DCB outp 04: 010223f1 00c0c080
[ 64.895585] [drm] nouveau 0000:02:00.0: DCB conn 00: 00001030
[ 64.895588] [drm] nouveau 0000:02:00.0: DCB conn 01: 00002130
[ 64.895590] [drm] nouveau 0000:02:00.0: DCB conn 02: 00000210
[ 64.895591] [drm] nouveau 0000:02:00.0: DCB conn 03: 00000211
[ 64.895593] [drm] nouveau 0000:02:00.0: DCB conn 04: 00000213
[ 64.895598] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xD20A
[ 64.920709] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xD657
[ 64.923698] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE6A7
[ 64.923706] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE7F0
[ 64.924780] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEA5C
[ 64.924783] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xEAC1
[ 64.944630] [drm] nouveau 0000:02:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes
[ 64.947016] [TTM] Zone kernel: Available graphics memory: 1541130 kiB
[ 64.947020] [TTM] Initializing pool allocator
[ 64.947024] [TTM] Initializing DMA pool allocator
[ 64.947037] [drm] nouveau 0000:02:00.0: Detected 1024MiB VRAM (DDR2)
[ 64.947539] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[ 64.959221] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[ 64.959226] [drm] nouveau 0000:02:00.0: TV-1 has no encoders, removing
[ 64.960051] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 64.960056] [drm] No driver support for vblank timestamp query.
[ 64.965102] [drm] nouveau 0000:02:00.0: 1 available performance level(s)
[ 64.965106] [drm] nouveau 0000:02:00.0: 3: core 550MHz shader 1375MHz memory 333MHz fanspeed 100%
[ 64.965110] [drm] nouveau 0000:02:00.0: c: core 400MHz shader 800MHz memory 300MHz fanspeed 40%
[ 64.975236] [drm] nouveau 0000:02:00.0: MM: using CRYPT for buffer copies
[ 65.078998] [drm] nouveau 0000:02:00.0: allocated 1280x1024 fb: 0x2c0000, bo ffff8800b6d1b800
[ 65.079210] fbcon: nouveaufb (fb0) is primary device
[ 65.095484] Console: switching to colour frame buffer device 160x64
[ 65.097051] fb0: nouveaufb frame buffer device
[ 65.097053] drm: registered panic notifier
[ 65.097060] [drm] Initialized nouveau 1.0.0 20120316 for 0000:02:00.0 on minor 0
[ 65.749197] lp0: using parport0 (interrupt-driven).
[ 65.749247] lp1: using parport1 (interrupt-driven).
[ 66.053480] Bluetooth: Core ver 2.16
[ 66.053526] NET: Registered protocol family 31
[ 66.053528] Bluetooth: HCI device and connection manager initialized
[ 66.053531] Bluetooth: HCI socket layer initialized
[ 66.053532] Bluetooth: L2CAP socket layer initialized
[ 66.053539] Bluetooth: SCO socket layer initialized
[ 66.071235] usblp 1-2:1.1: >usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2E12
[ 66.071961] usbcore: registered new interface driver usblp
[ 66.142470] Bluetooth: RFCOMM TTY layer initialized
[ 66.142478] Bluetooth: RFCOMM socket layer initialized
[ 66.142480] Bluetooth: RFCOMM ver 1.11
[ 66.178789] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 66.178793] Bluetooth: BNEP filters: protocol multicast
[ 67.020099] type=1400 audit(1355769572.636:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=7399 comm="apparmor_parser"
[ 67.020614] type=1400 audit(1355769572.636:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=7399 comm="apparmor_parser"
[ 67.112284] input: HDA NVidia Line as /devices/pci0000:00/0000:00:09.0/sound/card0/input4
[ 67.112456] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input5
[ 67.112594] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input6
[ 67.112729] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:09.0/sound/card0/input7
[ 67.112875] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:09.0/sound/card0/input8
[ 67.113013] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:09.0/sound/card0/input9
[ 67.113145] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:09.0/sound/card0/input10
[ 67.113281] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:09.0/sound/card0/input11
[ 68.392453] forcedeth 0000:00:0f.0: >irq 43 for MSI/MSI-X
[ 68.392491] forcedeth 0000:00:0f.0: >eth0: MSI enabled
[ 69.771798] usblp0: removed

[Raf80]

[ 69.774969] usblp 1-2:1.1: >usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x2E12
[ 74.294667] type=1400 audit(1355769579.908:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=7633 comm="apparmor_parser"
[ 74.313974] type=1400 audit(1355769579.928:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=7633 comm="apparmor_parser"
[ 74.320070] type=1400 audit(1355769579.936:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=7634 comm="apparmor_parser"
[ 74.320591] type=1400 audit(1355769579.936:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=7634 comm="apparmor_parser"
[ 75.808093] type=1400 audit(1355769581.424:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=7638 comm="apparmor_parser"
[ 75.808544] type=1400 audit(1355769581.424:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=7638 comm="apparmor_parser"
[ 75.843549] type=1400 audit(1355769581.456:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=7639 comm="apparmor_parser"
[ 75.843833] type=1400 audit(1355769581.456:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=7639 comm="apparmor_parser"
[ 75.843976] type=1400 audit(1355769581.456:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=7639 comm="apparmor_parser"
[ 77.768047] type=1400 audit(1355769583.384:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=7643 comm="apparmor_parser"
[ 86.642979] audit_printk_skb: 15 callbacks suppressed
[ 86.642984] type=1400 audit(1355769594.629:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=7641 comm="apparmor_parser"
[ 86.645348] type=1400 audit(1355769594.633:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=7641 comm="apparmor_parser"
[ 86.646519] type=1400 audit(1355769594.633:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=7641 comm="apparmor_parser"
[ 86.648188] type=1400 audit(1355769594.637:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=7641 comm="apparmor_parser"
[ 86.649041] type=1400 audit(1355769594.637:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=7641 comm="apparmor_parser"
[ 86.650238] type=1400 audit(1355769594.637:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=7641 comm="apparmor_parser"
[ 87.000570] init: alsa-restore main process (7702) terminated with status 99
[ 116.396076] end_request: I/O error, dev fd0, sector 0
[ 116.420107] end_request: I/O error, dev fd0, sector 0
[ 462.088035] usb 1-7: >new high-speed USB device number 5 using ehci_hcd
[ 462.222805] usb 1-7: >New USB device found, idVendor=14cd, idProduct=6700
[ 462.222813] usb 1-7: >New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 462.222818] usb 1-7: >Product: USB 2.0 SD/MMC READER
[ 462.222822] usb 1-7: >Manufacturer: SDMMC M121
[ 462.222826] usb 1-7: >SerialNumber: 834351670016
[ 462.224433] scsi7 : usb-storage 1-7:1.0
[ 463.225709] scsi 7:0:0:0: >Direct-Access USB 2.0 SD/MMC Reader PQ: 0 ANSI: 0 CCS
[ 463.226590] sd 7:0:0:0: >Attached scsi generic sg7 type 0
[ 463.229471] sd 7:0:0:0: >[sdg] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 463.230595] sd 7:0:0:0: >[sdg] Write Protect is off
[ 463.230603] sd 7:0:0:0: >[sdg] Mode Sense: 03 00 00 00
[ 463.231588] sd 7:0:0:0: >[sdg] No Caching mode page present
[ 463.231598] sd 7:0:0:0: >[sdg] Assuming drive cache: write through
[ 463.236569] sd 7:0:0:0: >[sdg] No Caching mode page present
[ 463.236577] sd 7:0:0:0: >[sdg] Assuming drive cache: write through
[ 463.240217] sdg: sdg1
[ 463.243596] sd 7:0:0:0: >[sdg] No Caching mode page present
[ 463.243606] sd 7:0:0:0: >[sdg] Assuming drive cache: write through
[ 463.243612] sd 7:0:0:0: >[sdg] Attached SCSI removable disk
[ 570.788023] usb 1-8: >new high-speed USB device number 6 using ehci_hcd
[ 570.921102] usb 1-8: >config 1 has an invalid interface number: 4 but max is 2
[ 570.921110] usb 1-8: >config 1 has an invalid interface number: 20 but max is 2
[ 570.921115] usb 1-8: >config 1 has no interface number 1
[ 570.921119] usb 1-8: >config 1 has no interface number 2
[ 570.921727] usb 1-8: >New USB device found, idVendor=12d1, idProduct=1035
[ 570.921732] usb 1-8: >New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 570.921736] usb 1-8: >Product: HUAWEI Technologies
[ 570.921740] usb 1-8: >Manufacturer: HUAWEI, Incorporated
[ 570.923110] scsi8 : usb-storage 1-8:1.20
[ 571.035300] usbcore: registered new interface driver usbserial
[ 571.035327] usbcore: registered new interface driver usbserial_generic
[ 571.035338] USB Serial support registered for generic
[ 571.035347] usbserial: USB Serial Driver core
[ 571.053489] usbcore: registered new interface driver option
[ 571.053510] USB Serial support registered for GSM modem (1-port)
[ 571.053588] option 1-8:1.0: >GSM modem (1-port) converter detected
[ 571.055086] usb 1-8: >GSM modem (1-port) converter now attached to ttyUSB0
[ 571.055241] option 1-8:1.4: >GSM modem (1-port) converter detected
[ 571.055409] usb 1-8: >GSM modem (1-port) converter now attached to ttyUSB1
[ 571.922757] scsi 8:0:0:0: >Direct-Access Huawei eMMC Storage 2.6 PQ: 0 ANSI: 2
[ 571.923697] sd 8:0:0:0: >Attached scsi generic sg8 type 0
[ 571.927034] sd 8:0:0:0: >[sdh] 7733248 512-byte logical blocks: (3.95 GB/3.68 GiB)
[ 571.928657] sd 8:0:0:0: >[sdh] Write Protect is off
[ 571.928664] sd 8:0:0:0: >[sdh] Mode Sense: 0f 0e 00 00
[ 571.930623] sd 8:0:0:0: >[sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 571.940603] sdh: sdh1 sdh2 sdh3 sdh4 < sdh5 sdh6 sdh7 sdh8 sdh9 sdh10 sdh11 sdh12 sdh13 sdh14 >
[ 571.944623] sd 8:0:0:0: >[sdh] Attached SCSI removable disk
[ 573.239782] EXT4-fs (sdh13): mounted filesystem with ordered data mode. Opts: (null)
[ 573.441315] EXT4-fs (sdh12): mounted filesystem with ordered data mode. Opts: (null)
[ 573.620914] EXT4-fs (sdh6): recovery complete
[ 573.623521] EXT4-fs (sdh6): mounted filesystem with ordered data mode. Opts: (null)