
Originariamente inviato da
spartanox
Aggiornamento spedizione:
"Sul veicolo FedEx per la consegna"
Non sto più nella pelle!! Se non consegnano oggi penso che non riuscirò a superare il fine settimana!!
Brutta la storia del microfono postata da icq85, è come un pugno nello stomaco! Spero che non sia un problema comune di questo modello! Io proverei a flashare il firmware stock e vedere che cosa succede...
A primo acchitto il file di CWM per il cubot che avete postato (@mandrake e quartz) rientra nelle specifiche per dimensione (inferiore a 6.143 KB), lo avete editato o vi è uscito direttamente così durante la procedura? In ogni caso se mi fanno la grazia di consegnarmi il telefono proverò oggi stesso e vi faccio sapere
EDIT:
Ho trovato questa guida spulciando sul web per fixare il volume microfono dei cinafonini (ZOPO ecc..)
La guida è in inglese, spero possa essere d'aiuto a chi ha riscontrato questo problema:
Prima di tutto scarichiamo Mobileuncle Tools dal play store:
https://play.google.com/store/apps/deta ... le.toolbox
Lo apriamo e seguiamo questi step:
Basics first: Terms and their meaning.
Sph – Speaker volume levels during a telephone conversation, Mic – microphone sensitivity levels (note that it is not microphone volume), Ring – ringer volume, Media – volume while playing music, movies, games, FMR – FM radio volume, Matv – TVB Volume
Max Vol: 160 (you cannot set it, except in type -> media)
Steps:
A. Open Mobile Uncle Tools and open engineering mode.
B. Under engineering mode, go to ‘Audio’.
C. Go to ‘Normal Mode’.
C1. Under ‘Type’ select ‘Mic’. Under ‘Level’ select ‘Level 0′.
C2. Under ‘Value is 0~255′ enter 255. For all levels, from level 0-6 set the value as 255. This will ensure that your voice is audible to other person even when you turn down the speaker volume. Feel free with lower values if other person is hearing you too loud. Apply the same settings to ‘Headset Mode’ -> Mic and ‘Loudspeaker Mode’ -> Mic.
C3. Next, under ‘Type’ select ‘Sph’. Under ‘Level’ select ‘Level 0′.
C4. Enter these values under ‘Value is 0~160′ for various levels.
Level 0 -> 100
Level 1 -> 120
Level 2 -> 130
Level 3 -> 135
Level 4 -> 140
Level 5 -> 150
Level 6 -> 160
Again, feel free to experiment with these settings if the earpiece speaker volume is too low or too high for you.
Apply the same settings (above) to ‘Headset Mode’ -> Sph, ‘Loudspeaker Mode’ -> Sph
C5. Next, under ‘Type’ select ‘Media’. Under ‘Level’ select ‘Level 0′.
C6. Enter these values under ‘Value is 0~255′ for various levels.
Level 0 -> 100
Level 1 -> 120
Level 2 -> 150
Level 3 -> 180
Level 4 -> 200
Level 5 -> 230
Level 6 -> 255
Again, feel free to experiment with these settings if the music volume is too low or too high for you.
Apply the same setings (above) to
‘Headset Mode’ -> FMR, Media and Matv
‘Loudspeaker Mode’ -> Ring, FMR, Media and Matv
C7. Restart the phone after applying all the settings.