Se è originale sì devi fare tutti quei passaggi, ma una volta fatti non sono più da fare e tutto diventa uguale ai samsung.
carmidag (09-12-12)
devo rifare il root al mio cell tornato dal'assistenza con la nuova scheda e con la build 3.12.xxx , s-on , sto seguendo la guida ho scaricato tools e messo su C, sono andato in fastboot e collegato al pc , quindi ho FASTBOOT USB , quindi vado in cmd e digito cd c:\tools + invio, quindi ho la stringa c:\tools accanto alla quale scrivo "fastboot oem lock" a dopo invio mi dà "command error" .
dove sbaglio?
hai ragione, me ne sono reso conto e stavo per modificare il post.
ma adesso ho il problema del test dei drivers , la prima stringa me la restituisce (adb device) con il numero del device, ma quando faccio "adb reboot bootloader" il device non si riavvia, rimane acceso, e in cmd mi da' tutta la serie di comandi possibili di adb .
Come procedo?
grazie
la mia situazione è questa
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
radio-26.09.04.11_M2
eMMC-BOOT
APR 12 2011,00:55:45
HTC Desire HD
Android Version
2.3.5
HTC Sense Version
3.0
Software Number
3.12.401
sono fermo al punto 5.
Con la stringa "adb devivices" mi restituisce il codice del device,
ma la fase successiva del test dei driver "adb reboot bootloader" non va a buon fine, non mi entra in bootloader.
Ho provato a chiudere tutti i programmi in esecuzione e quelli di avvio automatico, a reistallare i drivers , a disinstallare htc sync e reistallare i drivers , ma niente!!! qualcuno ha un consiglio da darmi ?
Grazie
p.s.
questo è quello che mi salta fuori dopo aver inserito la stringa per il reboot
C:\Users\utente>cd c:\tools
c:\tools>adb devices
List of devices attached
MB246RXXXXX device
c:\tools>adb reboot bootloader
Android Debug Bridge version 1.0.20
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb root - restarts adb with root permissions
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PDP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
Ultima modifica di peppe68; 12-12-12 alle 10:24
caro linux , questo sblocco mi sembra un parto!!! ho superato la fase del test ma adesso quando lancio il downgrade i dice:
Ace Advanced Hack Kit [Linux/OSX/Windows] attn1 2011/2012
___________________________
MAIN MENU | |
| Only ONE Menu Step to: |
1 - Hack Ace <----------------------------+ * S-OFF |
| * SIM Unlock |
2 - DONATE (Encouraged, but optional) | * SuperCID |
http://psas.revskills.de/?q=goldcard | * Root |
http://www.eff.org/ | * Busybox |
| |
************************************************** ********************
o - Options Menu (Return to Stock, Flash radios, etc)
************************************************** ********************
t - Toggle Flash Method - current method is fastbootRUU
************************************************** *******************
q - Quit
[Select and press Enter]1
3.12.405.1
This version of Android cannot use the hack kit at this time.
You can downgrade if you like, then rerun the hack step.
WARNING: THIS WILL WIPE DATA
[Would you like to downgrade? y/n]y
Download this RUU? [y,n]y
--2012-12-13 23:45:25-- http://tau.shadowchild.nl/files/PD98IMG-GB2.zip
Resolving tau.shadowchild.nl... failed: Unknown host.
wget: unable to resolve host address `tau.shadowchild.nl'
Sintassi del comando errata.
Formato del parametro non corretto - "PD98IMG-GB2.zip".
Woah dude[tte] - bogus md5sum! Bad mojo.... no file to flash
Check it out - renamed the file to PD98IMG/PD98IMG-GB2.zip-bad
You can re-download the file and keep going....
Download this RUU? [y,n]
mi potete aiutare?
p.s.
risolto tutto, mancava il file pd981img, che ra da scaricare e inserire nella cartella.
adesso ritorno alle rom custom
grazie
Ultima modifica di peppe68; 14-12-12 alle 00:45
io sono rimasto a numero 6 apro hack-ace.cmd
ce lo FASTBOOT USB
i dreiver li ho istallati cosa puo essere
***ERROR ERROR ERROR***
Phone not plugged in
OR
Driver not installed
OR
USB Debugging not enabled.
***ERROR ERROR ERROR***
Drücken Sie eine beliebige Taste . .
Io stavo impazzendo per poter superare i test dei driver, le ho provate tutte!!!
Alla fine ho risolto in questo modo:
1) partizionato il disco del portatile.
2) installato W7 senza aggiungere altro solo winrar, non scaricare e installare nulla!!!
3) preventivamente avevo scaricato il file tools , quello della pagina dei test dei drivers sul link indicato da Linux (dal link in prima pagina avevo scaricato tools ma penso sia corrotto o diverso, non so') messo in chiavetta prima e rimesso sul desktop.
4) messo sul desktop anche il file aahh.... per il downgrade, scaricando quello nuovo trovato tramite il link della cartella effen manual, (attenzione devi scaricare anche il file PD189img.gb2.zip tramite sempre il link che trovi in effen) e incollalo all'interno della cartella PD189img.
per le cose non indicate segui sempre la guida!!
stai attento a non avere chiavette o altro inserite nelle altre prese USB altrimenti ci possono essere dei problemi.
ciao peppe si il testo dei driver tutto ok.
é l'altro che hai proposto che mi sto cervellando..adesso ci provo ti faccio sapere